通用banner
Your current location : Home >> News >> Industry News

Simple way to clean and maintain super heavy CNC gantry milling

2021-03-22 10:19:56
a

1. The objects in CNC gantry milling work should be clamped with pins, screws or special tools. It is forbidden to add waterproof casings with ordinary wrenches to prevent injuries caused by dislocation.


2. The CNC gantry milling tool must be clamped firmly, otherwise it is not allowed to drive and work.


3. Before working, check the operating condition of a part of the machine tool transmission system, and install the partition of the machine tool before it can run.


4. CNC gantry milling and milling of various product workpieces, especially when rough milling, gradually slow drilling should be carried out.


5. When moving the operating table and tool table in CNC gantry milling, first loosen the fixed screws.


6. When loading and unloading tools in CNC gantry milling, use a copper or wooden hammer to lightly hit them to avoid injury caused by flying out of tool fragments.


7. During drilling, speed adjustment and tool adjustment are not allowed, and it is strictly forbidden to touch or accurately measure the product workpiece by hand.


After a period of application of super heavy CNC gantry milling, a full range of cleaning and maintenance should be carried out. The following simple cleaning and maintenance methods for super heavy CNC gantry milling:

数控龙门铣厂家

1. The daily tasks of cleaning and maintenance of the super heavy CNC gantry milling station must be the actual operating staff in the production workshop, and others cannot clean up without approval.


2. The actual operation staff should sort out their own clothes. Do not put on, take off your clothes, or wrap around your body near the machine that is started to avoid the equipment being twisted. Be sure to wear a safety helmet, pigtails should be put in the cap, no skirts or sandals.


3. Before running the gantry milling, the transmission system must be inspected. Whether each special tool and safety protection measures are innocent, the inspection is that the commercial insurance and the stopper on the gantry milling are not allowed to be disassembled!


4. No other objects can be placed on the body of the super heavy CNC gantry milling machine. When disassembling and replacing twist drills and fixtures, all actual operations must be terminated before they can be dismantled and replaced. If there are objects with burrs or uncleaned objects that are not allowed to be installed in the spindle bearing taper hole, the twist drill must be handled with wedge iron, and hammers are prohibited.


5. When punching holes on sheet metal, large and medium-sized or elongated work pieces, they must be compacted. It is forbidden to use a tractor for production and processing. When drilling and buried holes for product workpieces, the pressure and slow speed must be relieved to avoid damage to the service platform.


6. No other objects should be placed in the rotating range of the arm of the super heavy-duty CNC gantry milling, and should be kept clean. To eliminate iron pins, use a soft brush, and it is forbidden to blow with the mouth.


7. After the work is over, the switch power supply should be disconnected and the high-end car should be braked to avoid accidents. In addition, clean up the software and do a good job of machine maintenance.


Only by cleaning and maintaining the gantry milling well, can the use time of the gantry milling be increased and we can get great economic benefits.


The label

0
Next up: None

Service hotline

0760-8540-3246

Address: Ju'an Management Zone, Sanjiao Town, Zhongshan City, Guangdong Province

URL:www.juli999.com/

WeChat official account